[et_pb_section bb_built=”1″ admin_label=”Section” fullwidth=”on” specialty=”off” background_image=”http:\/\/www.cribbstechnologies.com\/wp-content\/uploads\/2017\/09\/IMG_20170907_083121.jpg” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” custom_css_main_element=”height: 375px;”][et_pb_fullwidth_header admin_label=”Fullwidth Header” title=”MQTT LED Strips” background_layout=”dark” text_orientation=”left” header_fullscreen=”off” header_scroll_down=”off” parallax=”off” parallax_method=”off” content_orientation=”center” image_orientation=”center” custom_button_one=”off” button_one_letter_spacing=”0″ button_one_use_icon=”default” button_one_icon_placement=”right” button_one_on_hover=”on” button_one_letter_spacing_hover=”0″ custom_button_two=”off” button_two_letter_spacing=”0″ button_two_use_icon=”default” button_two_icon_placement=”right” button_two_on_hover=”on” button_two_letter_spacing_hover=”0″ \/][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section”][et_pb_row admin_label=”row”][et_pb_column type=”3_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
The software I used is BRUH Automation’s code<\/a> but tweaked a bit. After I got the DMX amp and got everything working I decided to allow haaska <\/a>to\u00a0control the LEDs. I could turn them on and off and even change to some colors. I found that certain other colors weren’t working for some reason<\/p>\n [\/et_pb_text][et_pb_video admin_label=”Video” src=”https:\/\/youtu.be\/ya7_ICpB0NA” \/][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n Through a bunch of troubleshooting I was able to figure out that sometimes haaska sent RGB values and sometimes it sent MIRED values. I updated the sketch to handle both and issued a pull request that’s since been merged into the main codebase. Hooray open-source collaboration!<\/p>\n [\/et_pb_text][\/et_pb_column][et_pb_column type=”1_4″][et_pb_code admin_label=”Code”]